Siemens Gamesa onshore wind turbine SG 3.4-132

SG 3.4-132 for the France market

Onshore wind turbine

One of the most profitable product in its segment
The SG 3.4-132 is ideal in medium to high wind sites, where customers require nominal powers higher than 3 MW with an optimum Levelized Cost of Energy. Proven technologies ensure excellent performance and reliability.
Customer Contact

Would you like to know more about the SG 3.4-132? Are you interested in partnering with Siemens Gamesa?

comercial_consultas@siemensgamesa.com
Rotor diameter
132 m
Nominal power
3.465 MW
Technology
Geared
Special features
OptimaFlex
Key Facts
  • Available only for France
  • Optimum LCoE for medium and high winds
  • Enhanced performance with the highest levels of reliability
  • Several tower height options to comply with height restrictions
  • Capable of boosting its nominal power to 3.75 MW
Recommended for

Designed for medium wind sites

An enhanced performance you can rely on
Technical specifications
General details
Rated power 3.465 MW
IEC class IA/IIA
Flexible Power rating 3.0 MW to 3.75 MW
Control Pitch and variable speed
Standard operating temperature Range from -20ºC to 30ºC (1)
Rotor
Diameter 132 m
Swept area 13,685 m²
Power density 253.20 W/m²
Blades
Length 64.5 m
Airfoils Siemens Gamesa
Material Fiberglass reinforced with epoxy or polyester resin
Tower
Type Multiple technologies available
Height 114, 97 and 84 m
Gearbox
Type 3 stages
Generator
Type Doubly-fed induction machine
Voltage 690 V AC
Frequency 50 Hz/60 Hz
Protection class IP 54
Power factor 0.925 CAP-0.925 IND throughout the power range (2)
(1) Different versions and optional kits are available to adapt machinery to high or low temperatures and saline or dusty environments.
(2) Power factor at generator output terminals, on low voltage side before transformer input terminals.
The most profitable product in its segment
AEP increase SG 3.4-132 vs. SG 2.6-114
The SG 3.4-132 wind turbine joins the Siemens Gamesa portfolio with a clear objective: to complement the product offer for medium- and high-wind sites where markets require nominal powers higher than 3 MW at an optimum Levelized Cost of Energy. Informed by 40 years’ experience in wind energy and a natural evolution of the Siemens Gamesa 2.X product series, this Class I/II solution ensures enhanced performance with high levels of reliability.
Technological highlights
Our onshore approach is focused on geared technology, in which we have extensive knowledge and expertise. The hallmarks of Siemens Gamesa turbines are: reliability, robustness and a modular, flexible design for optimum adaptation and maximization of production at any site and in all wind conditions.
Thanks to OptimaFlex technology, we go beyond the traditional off-the-shelf approach that results in products that are sub-optimal for many sites, and we deliver a uniquely tailored solution that is perfect for our customers’ specific needs. Optimized site design combined with a customizable product platform, based on flexible power rating, site specific towers and optimized BoP solutions, allow Siemens Gamesa to deliver reduced LCoE by increasing AEP while optimizing cost.
As an aerodynamic blade add-on, DinoTails® Next Generation reduces the sound power levels by using a serrated trailing edge mounted at the blade and adding finer combs in between the teeth. This world-leading noise reduction technology enables us to create value for our customers by maximizing AEP and reducing the LCoE in sites with noise constraints.
This turbine is equipped with blades made of fiberglass reinforced with epoxy or polyester resin. Together with the state-of-the-art aerodynamic profile, we can produce lighter blades having greater strength and improved dynamic behavior with less load transmitted to the rest of the components.
Turbine sensors continuously transmit data to our diagnostic centers, enabling the early detection of anomalies and preventing potential failures. By analyzing vibration patterns we can optimize your service plan and anticipate repairs before serious damage occurs.
The pioneering RecyclableBlade is an option based on our proven IntegralBlade® technology and manufacturing follows the exact same process with only a change of resin. The new resin is as strong and reliable as before, but with added recyclability benefits. After reaching end-of-life and decommissioning the blade materials can be separated and recycled in new applications.
GreenerTower is an option, which focuses on achieving significant CO2 equivalent reductions in the steel plate production for steel towers. For the GreenerTower, a maximum of 0.7 tons of CO2 equivalent emissions are permitted per ton of steel. This means a CO2 reduction of at least 63% compared to conventional steel production.
Downloads
Need Help?
The solutions we provide are driven by the benefits they deliver. This applies as much to our pursuit of absolute safety as to maximizing your return. Whether by inventing a new technology, evolving an existing product, or simply finding a smarter way of working, we strive to lower costs and raise returns on investments.

Our experts are on hand to help with any questions you have. Email us or login to our customer portal. Here you’ll be able to monitor configuration, production, and agreements for your wind power plants, and find relevant news from Siemens Gamesa Renewable Energy.

Operating in around 90 countries, Siemens Gamesa offers an extensive range of onshore wind turbine technologies to cover all wind classes and site conditions. By listening to our customers - and backed up by over 40 years of experience - we know just what it takes to develop and manage a successful onshore project.
Further onshore wind platforms

Share

Further information about data protection can be found in our privacy policy.