SG 2.2-122

Onshore wind turbine

Greater capacity factor in low-wind sites

Boasting a 122-meter rotor combined with a 2.2 MW generator, the SG 2.2-122 is especially suited to Class S sites, thanks to its extremely low power density for a reduced Levelized Cost of Energy.

Customer Contact

Would you like to know more about the SG 2.2-122? Are you interested in partnering with Siemens Gamesa?

onshoresales@siemensgamesa.com

Download the product brochure

Rotor diameter

122 m

Nominal power

2.2 MW

Technology

Geared

Wind class

IEC III/S

Key Facts

Minimum power density and high efficiency for reduced LCoE
One of the greatest capacity factors for low-wind low-turbulence conditions
Proven technology with optimized design, prototyping, validation and industrialization processes
High reliability, with an average fleet availability greater than 98%

Recommended for

Low wind, onshore locations

Other models in the platform

Model	Rotor Dia.	Wind type
SG 2.1-114	114 m	For low to medium wind
SG 2.6-114	114 m	For medium to high wind
SG 2.9-129	129 m	For low to medium wind

A high performer in low-wind sites

The SG 2.2-122 has one of the greatest capacity factors in low-wind, low-turbulence sites, offering a 8% increase in annual energy production compared to the SG 2.1-114 model.

A 60-meter blade increases the swept area to 11,690 m2, while its aerodynamic profile helps to keep noise levels low. The electrical system is shared by all other solutions with 2.1 MW of nominal power.

Technical specification

General details
Rated power	2.2 MW
Wind class	IEC III/S
Control	Pitch and variable speed
Standard operating temperature	Range from 0ºC to 40ºC (1)

Rotor
Diameter	122 m
Swept area	11,690 m²
Power density	188.19 W/m²

Blades
Length	60 m
Airfoils	Siemens Gamesa
Material	Fiberglass reinforced with epoxy or polyester resin

Tower
Type	Multiple technologies available
Height	108, 127 m and site-specific

Gearbox
Type	3 stages

Generator
Type	Doubly-fed induction machine
Voltage	690 V AC
Frequency	50 Hz/60 Hz
Protection class	IP 54
Power factor	0.95 CAP-0.95 IND throughout the power range (2)

(1) Different versions and optional kits are available to adapt machinery to
high or low temperatures and saline or dusty environments.

(2) Power factor at generator output terminals, on low voltage side before
transformer input terminals.

One of the greatest capacity factors in low-wind sites

The SG 2.2-122 wind turbine is an addition to the Siemens Gamesa 2.X product platform, a benchmark in the wind power sector thanks to its excellent capacity factor, high profitability. Specifically optimized for low-wind, low-turbulence conditions, this model seeks competitive positioning in markets with locations of this type, such as China and India, through its low power density and reduced Levelized Cost of Energy.

Technological Highlights

Reliable geared technology

Our onshore approach is focused on geared technology, in which we have extensive knowledge and expertise. The hallmarks of Siemens Gamesa turbines are: reliability, robustness and a modular, flexible design for optimum adaptation and maximization of production at any site and in all wind conditions.

DinoTails® Next Generation

As an aerodynamic blade add-on, DinoTails® Next Generation reduces the sound power levels by using a serrated trailing edge mounted at the blade and adding finer combs in between the teeth. This world-leading noise reduction technology enables us to create value for our customers by maximizing AEP and reducing the LCoE in sites with noise constraints.

Download the DinoTails® flyer

Reinforced fiberglass blades

This turbine is equipped with blades made of fiberglass reinforced with epoxy or polyester resin. Together with the state-of-the-art aerodynamic profile, we can produce lighter blades having greater strength and improved dynamic behavior with less load transmitted to the rest of the components.

Remote diagnostics services

Turbine sensors continuously transmit data to our diagnostic centers, enabling the early detection of anomalies and preventing potential failures. By analyzing vibration patterns we can optimize your service plan and anticipate repairs before serious damage occurs.

Downloads

Read more about Wind Turbine SG 2.2-122

PDF

Wind Turbine SG 2.2-122 brochure

Find the best onshore product for each project

PDF

Siemens Gamesa onshore product portfolio

Onshore technological solutions

PDF

Onshore technological solutions

Need Help?

If you’re interested in becoming a client

The solutions we provide are driven by the benefits they deliver. This applies as much to our pursuit of absolute safety as to maximizing your return. Whether by inventing a new technology, evolving an existing product, or simply finding a smarter way of working, we strive to lower costs and raise returns on investments.

Email us

If you’re an existing client

Our experts are on hand to help with any questions you have. Email us or login to our customer portal. Here you’ll be able to monitor configuration, production, and agreements for your wind power plants, and find relevant news from Siemens Gamesa Renewable Energy.

If you want to know more about our onshore business

Operating in around 90 countries, Siemens Gamesa offers an extensive range of onshore wind turbine technologies to cover all wind classes and site conditions. By listening to our customers - and backed up by almost 40 years of experience - we know just what it takes to develop and manage a successful onshore project.

View products and services